Diese Seite bei php.net
The PHP manual text and comments are covered by the Creative Commons Attribution 3.0 License © the PHP Documentation Group - Impressum - mail("TO:Reinhard Neidl",...)
(PHP 4, PHP 5)
print_r — Gibt Variablen-Informationen in lesbarer Form aus
print_r() zeigt Informationen über eine Variable in menschenlesbarer Form an.
print_r(), var_dump() und var_export() zeigen mit PHP 5 auch private und geschützte Eigenschaften von Objekten an. Statische Klasseneigenschaften werden hingegen nicht angezeigt.
Denken Sie daran, dass ein Aufruf von print_r() den internen Arrayzeiger auf das letzte Element des Arrays setzt. Um den Zeiger wieder an den Anfang zu setzen, benutzen Sie die Funktion reset().
Der auszugebende Ausdruck.
Wenn Sie die Ausgabe von print_r() zum Weiterverarbeiten abfangen möchten, benutzen Sie dazu den Parameter return. Wenn dieser auf TRUE gesetzt ist, gibt print_r() die Information zurück, statt sie auszugeben.
Wenn die Funktion für eine Variable vom Typ string, integer oder float aufgerufen wird, wird der Wert der Variablen angezeigt. Falls ein array übergeben wurde, werden die Werte in einem Format angezeigt, das sowohl die Schlüssel als auch die Elemente darstellt. Für Variablen vom Typ object gilt das Gleiche.
Wenn der Parameter return den Wert TRUE hat, gibt die Funktion einen String zurück. Andernfalls ist der Rückgabewert TRUE.
Hinweis:
Diese Funktion benutzt intern Ausgabenpufferung mit diesem Parameter und kann daher nicht in einer ob_start()-Callbackfunktion eingesetzt werden.
| Version | Beschreibung |
|---|---|
| 4.3.0 | Der Parameter return wurde hinzugefügt. Wenn Sie die Ausgabe von print_r() in älteren PHP-Versionen abfangen müssen, verwenden Sie die Ausgabe-Kontrollfunktionen. |
| 4.0.4 | Vor PHP 4.0.4 erzeugte print_r() eine Endlosschleife, wenn ein übergebenes array oder object sich selbst direkt oder indirekt referenzierte. Ein Beispiel dafür ist print_r($GLOBALS), weil $GLOBALS selbst eine globale Variable ist, und damit eine Referenz auf sich selbst enthält. |
Beispiel #1 print_r()-Beispiel
<pre>
<?php
$a = array ('a' => 'Apfel', 'b' => 'Banane', 'c' => array ('x', 'y', 'z'));
print_r ($a);
?>
</pre>
Das oben gezeigte Beispiel erzeugt folgende Ausgabe:
<pre>
Array
(
[a] => Apfel
[b] => Banane
[c] => Array
(
[0] => x
[1] => y
[2] => z
)
)
</pre>
Beispiel #2 return-Parameter-Beispiel
<?php
$b = array ('a' => 'Affe', 'foo' => 'bar', 'x' => array ('x', 'y', 'z'));
$results = print_r($b, true); //$results enthaelt nun die Ausgabe von print_r
?>
This function removes clutter from print_r's output.
I use it instead of print_r now.
Here is an example:
<?PHP
$data = array(
"mode" => "sets",
"sets" => array(
123,
456,
789
),
"etc" => array(
"letters" => array(
"a",
"b"
),
"pie",
"sharks"
)
);
print_r($data);
/*
Array
(
[mode] => sets
[sets] => Array
(
[0] => 123
[1] => 456
[2] => 789
)
[etc] => Array
(
[letters] => Array
(
[0] => a
[1] => b
)
[0] => pie
[1] => sharks
)
)
*/
neat_r($data);
/*
mode: sets
sets:
123
456
789
etc:
letters:
a
b
pie
sharks
*/
?>
Here is the function:
<?PHP
/*
neat_r works like print_r but with much less visual clutter.
By Jake Lodwick. Copy freely.
*/
function neat_r($arr, $return = false) {
$out = array();
$oldtab = " ";
$newtab = " ";
$lines = explode("\n", print_r($arr, true));
foreach ($lines as $line) {
//remove numeric indexes like "[0] =>" unless the value is an array
if (substr($line, -5) != "Array") { $line = preg_replace("/^(\s*)\[[0-9]+\] => /", "$1", $line, 1); }
//garbage symbols
foreach (array(
"Array" => "",
"[" => "",
"]" => "",
" =>" => ":",
) as $old => $new) {
$out = str_replace($old, $new, $out);
}
//garbage lines
if (in_array(trim($line), array("Array", "(", ")", ""))) continue;
//indents
$indent = "";
$indents = floor((substr_count($line, $oldtab) - 1) / 2);
if ($indents > 0) { for ($i = 0; $i < $indents; $i++) { $indent .= $newtab; } }
$out[] = $indent . trim($line);
}
$out = implode("\n", $out) . "\n";
if ($return == true) return $out;
echo $out;
}
?>
Hi all, here is a function that will display any variable, including objects, as XML so you can expand and collapse in browsers etc. Note that it will output all variables, not just public ones.
<?php
/**
* Will output in a similar form to print_r, but the nodes are xml so can be collapsed in browsers
*
* @param mixed $mixed
*/
function print_r_xml($mixed)
{
// capture the output of print_r
$out = print_r($mixed, true);
// Replace the root item with a struct
// MATCH : '<start>element<newline> ('
$root_pattern = '/[ \t]*([a-z0-9 \t_]+)\n[ \t]*\(/i';
$root_replace_pattern = '<struct name="root" type="\\1">';
$out = preg_replace($root_pattern, $root_replace_pattern, $out, 1);
// Replace array and object items structs
// MATCH : '[element] => <newline> ('
$struct_pattern = '/[ \t]*\[([^\]]+)\][ \t]*\=\>[ \t]*([a-z0-9 \t_]+)\n[ \t]*\(/miU';
$struct_replace_pattern = '<struct name="\\1" type="\\2">';
$out = preg_replace($struct_pattern, $struct_replace_pattern, $out);
// replace ')' on its own on a new line (surrounded by whitespace is ok) with '</var>
$out = preg_replace('/^\s*\)\s*$/m', '</struct>', $out);
// Replace simple key=>values with vars
// MATCH : '[element] => value<newline>'
$var_pattern = '/[ \t]*\[([^\]]+)\][ \t]*\=\>[ \t]*([a-z0-9 \t_\S]+)/i';
$var_replace_pattern = '<var name="\\1">\\2</var>';
$out = preg_replace($var_pattern, $var_replace_pattern, $out);
$out = trim($out);
$out='<?xml version="1.0"?><data>'.$out.'</data>';
return $out;
}
?>
A simple function to send the output of print_r to firebug.
The script creates a dummy console object with a log method for when firebug is disabled/not available.
<?php
function debug ($data) {
echo "<script>\r\n//<![CDATA[\r\nif(!console){var console={log:function(){}}}";
$output = explode("\n", print_r($data, true));
foreach ($output as $line) {
if (trim($line)) {
$line = addslashes($line);
echo "console.log(\"{$line}\");";
}
}
echo "\r\n//]]>\r\n</script>";
}
?>
I add this function to the global scope on just about every project I do, it makes reading the output of print_r() in a browser infinitely easier.
<?php
function print_r2($val){
echo '<pre>';
print_r($val);
echo '</pre>';
}
?>
It also makes sense in some cases to add an if statement to only display the output in certain scenarios, such as:
if(debug==true)
if($_SERVER['REMOTE_ADDR'] == '127.0.0.1')
Here's an array_depth() function that calculates the depth of an array using the indentation in the output of print_r():
<?php
function array_depth($array) {
$max_indentation = 1;
$array_str = print_r($array, true);
$lines = explode("\n", $array_str);
foreach ($lines as $line) {
$indentation = (strlen($line) - strlen(ltrim($line))) / 4;
if ($indentation > $max_indentation) {
$max_indentation = $indentation;
}
}
return ceil(($max_indentation - 1) / 2) + 1;
}
?>
It's better than writing a recursive function to do the same thing, as print_r() handles the problem of infinitely-deep arrays for you quite nicely.
Here is another version that parses the print_r() output. I tried the one posted, but I had difficulties with it. I believe it has a problem with nested arrays. This handles nested arrays without issue as far as I can tell.
<?php
function print_r_reverse($in) {
$lines = explode("\n", trim($in));
if (trim($lines[0]) != 'Array') {
// bottomed out to something that isn't an array
return $in;
} else {
// this is an array, lets parse it
if (preg_match("/(\s{5,})\(/", $lines[1], $match)) {
// this is a tested array/recursive call to this function
// take a set of spaces off the beginning
$spaces = $match[1];
$spaces_length = strlen($spaces);
$lines_total = count($lines);
for ($i = 0; $i < $lines_total; $i++) {
if (substr($lines[$i], 0, $spaces_length) == $spaces) {
$lines[$i] = substr($lines[$i], $spaces_length);
}
}
}
array_shift($lines); // Array
array_shift($lines); // (
array_pop($lines); // )
$in = implode("\n", $lines);
// make sure we only match stuff with 4 preceding spaces (stuff for this array and not a nested one)
preg_match_all("/^\s{4}\[(.+?)\] \=\> /m", $in, $matches, PREG_OFFSET_CAPTURE | PREG_SET_ORDER);
$pos = array();
$previous_key = '';
$in_length = strlen($in);
// store the following in $pos:
// array with key = key of the parsed array's item
// value = array(start position in $in, $end position in $in)
foreach ($matches as $match) {
$key = $match[1][0];
$start = $match[0][1] + strlen($match[0][0]);
$pos[$key] = array($start, $in_length);
if ($previous_key != '') $pos[$previous_key][1] = $match[0][1] - 1;
$previous_key = $key;
}
$ret = array();
foreach ($pos as $key => $where) {
// recursively see if the parsed out value is an array too
$ret[$key] = print_r_reverse(substr($in, $where[0], $where[1] - $where[0]));
}
return $ret;
}
}
?>
Here is a nice version of print_r that prints things with colors and tables.
I've called it print_nice
<?php
function print_nice($elem,$max_level=10,$print_nice_stack=array()){
if(is_array($elem) || is_object($elem)){
if(in_array(&$elem,$print_nice_stack,true)){
echo "<font color=red>RECURSION</font>";
return;
}
$print_nice_stack[]=&$elem;
if($max_level<1){
echo "<font color=red>nivel maximo alcanzado</font>";
return;
}
$max_level--;
echo "<table border=1 cellspacing=0 cellpadding=3 width=100%>";
if(is_array($elem)){
echo '<tr><td colspan=2 style="background-color:#333333;"><strong><font color=white>ARRAY</font></strong></td></tr>';
}else{
echo '<tr><td colspan=2 style="background-color:#333333;"><strong>';
echo '<font color=white>OBJECT Type: '.get_class($elem).'</font></strong></td></tr>';
}
$color=0;
foreach($elem as $k => $v){
if($max_level%2){
$rgb=($color++%2)?"#888888":"#BBBBBB";
}else{
$rgb=($color++%2)?"#8888BB":"#BBBBFF";
}
echo '<tr><td valign="top" style="width:40px;background-color:'.$rgb.';">';
echo '<strong>'.$k."</strong></td><td>";
print_nice($v,$max_level,$print_nice_stack);
echo "</td></tr>";
}
echo "</table>";
return;
}
if($elem === null){
echo "<font color=green>NULL</font>";
}elseif($elem === 0){
echo "0";
}elseif($elem === true){
echo "<font color=green>TRUE</font>";
}elseif($elem === false){
echo "<font color=green>FALSE</font>";
}elseif($elem === ""){
echo "<font color=green>EMPTY STRING</font>";
}else{
echo str_replace("\n","<strong><font color=red>*</font></strong><br>\n",$elem);
}
}
?>
Here is a function that formats the output of print_r as a expandable/collapsable tree list using HTML and JavaScript.
<?php
function print_r_tree($data)
{
// capture the output of print_r
$out = print_r($data, true);
// replace something like '[element] => <newline> (' with <a href="javascript:toggleDisplay('...');">...</a><div id="..." style="display: none;">
$out = preg_replace('/([ \t]*)(\[[^\]]+\][ \t]*\=\>[ \t]*[a-z0-9 \t_]+)\n[ \t]*\(/iUe',"'\\1<a href=\"javascript:toggleDisplay(\''.(\$id = substr(md5(rand().'\\0'), 0, 7)).'\');\">\\2</a><div id=\"'.\$id.'\" style=\"display: none;\">'", $out);
// replace ')' on its own on a new line (surrounded by whitespace is ok) with '</div>
$out = preg_replace('/^\s*\)\s*$/m', '</div>', $out);
// print the javascript function toggleDisplay() and then the transformed output
echo '<script language="Javascript">function toggleDisplay(id) { document.getElementById(id).style.display = (document.getElementById(id).style.display == "block") ? "none" : "block"; }</script>'."\n$out";
}
?>
Pass it a multidimensional array or object and each sub-array/object will be hidden and replaced by a html link that will toggle its display on and off.
Its quick and dirty, but great for debugging the contents of large arrays and objects.
Note: You'll want to surround the output with <pre></pre>
If you have to catch the output without showing it at all at first (for example, if you want to append the print_r output to a file), you can do this:
<?php
ob_start();
print_r( $some_array );
$output = ob_get_clean();
// if you want to append the print_r output of $some_array to, let's say, log.txt:
file_put_contents( 'log.txt', file_get_contents( 'log.txt' ) . $output )
?>
I use this all the time when debugging objects, but when you have a very large object with big arrays of sub-objects, it's easy to get overwhelmed with the large amount of output....sometimes you don't want to see absolutely every sub-object.
I made this function to debug objects while "hiding" sub-objects of certain types. This also color codes the output for a more readable printout.
<?php
function wtf($var, $arrayOfObjectsToHide=null, $fontSize=11)
{
$text = print_r($var, true);
if (is_array($arrayOfObjectsToHide)) {
foreach ($arrayOfObjectsToHide as $objectName) {
$searchPattern = '#('.$objectName.' Object\n(\s+)\().*?\n\2\)\n#s';
$replace = "$1<span style=\"color: #FF9900;\">--> HIDDEN - courtesy of wtf() <--</span>)";
$text = preg_replace($searchPattern, $replace, $text);
}
}
// color code objects
$text = preg_replace('#(\w+)(\s+Object\s+\()#s', '<span style="color: #079700;">$1</span>$2', $text);
// color code object properties
$text = preg_replace('#\[(\w+)\:(public|private|protected)\]#', '[<span style="color: #000099;">$1</span>:<span style="color: #009999;">$2</span>]', $text);
echo '<pre style="font-size: '.$fontSize.'px; line-height: '.$fontSize.'px;">'.$text.'</pre>';
}
// example usage:
wtf($myBigObject, array('NameOfObjectToHide_1', 'NameOfObjectToHide_2'));
?>
Do you think it is difficult to see what print_r() returns?
<?php
echo '<pre>';
print_r($array);
echo '</pre>';
?>
And if you have to write this many times in a page, use this:
<?php
function preint_r($array)
{
echo '<pre>';
print_r($array);
echo '</pre>';
}
?>
I like the print_r() function as I am sure many of you do, however when I am working on a script via a browser the output it not easy to read so I have created my own variation hope this helps any of you guys who have had the same frustration.
Start File ###########################################
<?php
/*
File Name: print_ar.php
PHP: 5.2.3
*/
function print_ar($array, $count=0) {
$i=0;
$tab ='';
while($i != $count) {
$i++;
$tab .= " | ";
}
foreach($array as $key=>$value){
if(is_array($value)){
echo $tab."[<strong><u>$key</u></strong>]<br />";
$count++;
print_ar($value, $count);
$count--;
}
else{
$tab2 = substr($tab, 0, -12);
echo "$tab2~ $key: <strong>$value</strong><br />";
}
$k++;
}
$count--;
}
?>
End File ###########################################
Use is exactly like the print_r() function example;
<?php
require("print_ar.php");
$array = array(
"Main1" => array(
"Sub1" => "Data 1-1",
"Sub2" => "Data 1-2",
"Sub3" => "Data 1-3",
),
"Main2" =>
array (
"Sub1" => "Data 2-1",
"Sub2" => "Data 2-2",
"Sub3" => "Data 2-3",
)
);
print_ar($array);
?>
Will give you:
[Main1]
|~ Sub1: Data 1-1
|~ Sub2: Data 1-2
|~ Sub3: Data 1-3
[Main2]
|~ Sub1: Data 2-1
|~ Sub2: Data 2-2
|~ Sub3: Data 2-3
Vice:
Array ( [Main1] => Array ( [Sub1] => Data 1-1 [Sub2] => Data 1-2 [Sub3] => Data 1-3 ) [Main2] => Array ( [Sub1] => Data 2-1 [Sub2] => Data 2-2 [Sub3] => Data 2-3 ) )
This is an alternative for printing arrays. It bolds array values.
<?php
function print_array(&$a, $str = "")
{
if ($str[0]) {
echo "$str =";
}
echo ' array( ';
foreach ($a as $k => $v) {
echo "[$k]".' => ';
if (is_array($v)) {
print_array($v);
}
else {
echo "<strong>$a[$k]</strong> ";
}
}
echo ') ';
}
$a1 = array ("apples", "oranges", "pears");
$a2 = array ("potatos", "green beans", "squash");
$a3 = array ("euros", "dollars", "pesos", "dinars");
$test = range(1, 9);
array_push($test, array ("fruit" => $a1, "vegies" => $a2, "money" => $a3));
print_array($test, "test");
?>
my take on the highlighted markupped debug function:
<?php
/**
* print_array()
* Does a var_export of the array and returns it between <pre> tags
*
* @param mixed $var any input you can think of
* @return string HTML
*/
function print_array($var)
{
$input =var_export($var,true);
$input = preg_replace("! => \n\W+ array \(!Uims", " => Array ( ", $input);
$input = preg_replace("!array \(\W+\),!Uims", "Array ( ),", $input);
return("<pre>".str_replace('><?', '>', highlight_string('<'.'?'.$input, true))."</pre>");
}
?>
Many developers have submitted bugs to the PHP development team with regards to print_r showing protected and private properties of objects (PHP 5). This is not a bug; sensitive information (ex. database connection object) should be encapsulated within a private member function of your class.
I was having problems using print_r because I didn't like the fact that if tags where included in the array it would still be parsed by the browsers.
Heres a simple fix for anyone who is having the same problem as I did. This will output your text properly for viewing through the browser instead of the browser's "view source" or CLI.
Script:
<?php
$MyArray[0]="<div align='center'>My Text</div>";
echo "<pre>".htmlspecialchars(print_r($MyArray,true))."</pre>";
?>
Output:
<pre>Array
(
[0] => <div align='center'>My Text</div>
)
</pre>
I use a function. Since browsers neglect extra spaces and line feeds.
<?php
function print_a($subject){
echo str_replace("=>","⇒",str_replace("Array","<font color=\"red\"><b>Array</b></font>",nl2br(str_replace(" "," ",print_r($subject,true)))));
}
?>
I have written a nice debugging function.
This function handles arrays beautifully.
<?php
//Debug variables, $i and $k are for recursive use
function DebugDisplayVar($input, $name = "Debug", $i = "0", $k = array("Error")){
if(is_array($input))
{ foreach ($input as $i => $value){
$temp = $k;
$temp[] = $i;
DebugDisplayVar($value, $name, $i, $temp);}
}else{//if not array
echo "$".$name;//[$k]
foreach ($k as $i => $value){
if($value !=="Error"){echo "[$value]";}
}
echo " = $input<br>";
} }
//outputs
Debug[0] = value
Debug[1] = another value
ect...
?>
You cannot use print_r(), var_dump() nor var_export() to get static member variables of a class. However, in PHP5 you can use Reflection classes for this:
<?php
$reflection = new ReflectionClass('Static');
print_r($reflection->getStaticProperties());
?>
@highstrike at gmail dot com 08-Jan-2008 02:34
You have an bug in your debug script, the script only prints public properties of the exported object.
If you want to export all object properties (public, private, protected) to an array, then simply cast the object to an array:
<?php
class some
{
public $pub = 1;
protected $prot = 2;
private $priv = 3;
}
var_dump( (array) new some() );
?>
result:
--------------
array(3) {
["pub"]=>
int(1)
["*prot"]=>
int(2)
["somepriv"]=>
int(3)
}
There is a library to create nice output of variables, arrays, hash-tables and even objects. It is great for developing/debugging and looks very much better than any print_r output.
Usage:
<?php
debug::show($myVar, 'caption');
?>
You can download it for free at http://sourceforge.net/projects/phpcorestdfuncs
For an example take a look at http://demo.corvent.ch/stdfuncs/
Another slight modification to the previous post to allow for empty array elements
added the following lines after the first preg_match block
<?php
} else if ($expecting == 2 && preg_match('/^\[(.+?)\] \=\>$/', $trim, $matches)) { // array element
// the array element is blank
list ($fullMatch, $key) = $matches;
$topArray[$key] = $element;
}
?>
A slight modification to the previous post to allow for arrays containing mutli line strings. haven't fully tested it with everything, but seems to work great for the stuff i've done so far.
<?php
function print_r_reverse(&$output)
{
$expecting = 0; // 0=nothing in particular, 1=array open paren '(', 2=array element or close paren ')'
$lines = explode("\n", $output);
$result = null;
$topArray = null;
$arrayStack = array();
$matches = null;
while (!empty($lines) && $result === null)
{
$line = array_shift($lines);
$trim = trim($line);
if ($trim == 'Array')
{
if ($expecting == 0)
{
$topArray = array();
$expecting = 1;
}
else
{
trigger_error("Unknown array.");
}
}
else if ($expecting == 1 && $trim == '(')
{
$expecting = 2;
}
else if ($expecting == 2 && preg_match('/^\[(.+?)\] \=\> (.+)$/', $trim, $matches)) // array element
{
list ($fullMatch, $key, $element) = $matches;
if (trim($element) == 'Array')
{
$topArray[$key] = array();
$newTopArray =& $topArray[$key];
$arrayStack[] =& $topArray;
$topArray =& $newTopArray;
$expecting = 1;
}
else
{
$topArray[$key] = $element;
}
}
else if ($expecting == 2 && $trim == ')') // end current array
{
if (empty($arrayStack))
{
$result = $topArray;
}
else // pop into parent array
{
// safe array pop
$keys = array_keys($arrayStack);
$lastKey = array_pop($keys);
$temp =& $arrayStack[$lastKey];
unset($arrayStack[$lastKey]);
$topArray =& $temp;
}
}
// Added this to allow for multi line strings.
else if (!empty($trim) && $expecting == 2)
{
// Expecting close parent or element, but got just a string
$topArray[$key] .= "\n".$line;
}
else if (!empty($trim))
{
$result = $line;
}
}
$output = implode(n, $lines);
return $result;
}
/**
* @param string $output : The output of a multiple print_r calls, separated by newlines
* @return mixed[] : parseable elements of $output
*/
function print_r_reverse_multiple($output)
{
$result = array();
while (($reverse = print_r_reverse($output)) !== NULL)
{
$result[] = $reverse;
}
return $result;
}
$output = '
Array
(
[a] => apple
[b] => banana
[c] => Array
(
[0] => x
[1] => y
[2] => z
[3] => Array
(
[nest] => yes
[nest2] => Array
(
[nest] => some more
asffjaskkd
)
[nest3] => o rly?
)
)
)
some extra stuff
';
var_dump(print_r_reverse($output), $output);
?>
This should output
array(3) {
["a"]=>
string(5) "apple"
["b"]=>
string(6) "banana"
["c"]=>
array(4) {
[0]=>
string(1) "x"
[1]=>
string(1) "y"
[2]=>
string(1) "z"
[3]=>
array(3) {
["nest"]=>
string(3) "yes"
["nest2"]=>
array(1) {
["nest"]=>
string(40) "some more
asffjaskkd"
}
["nest3"]=>
string(6) "o rly?"
}
}
}
string(18) "nsome extra stuffn"
Added:
else if (!empty($trim) && $expecting == 2)
{
// Expecting close parent or element, but got just a string
$topArray[$key] .= "\n".$line;
}
This is a better print_r reverse algorithm, that works with arbitrary nested arrays. Anything else it treats as strings. The second function allows you to take a string with multiple print_r results concatenated, and returns the result of parsing each of them.
<?php
/**
* @param string &$output : The output of a print_r call; this parameter is DESTRUCTIVE, and will be set to the remainder
* of $output which is not parsed.
* @return mixed : the first parseable element of $output
*/
function print_r_reverse(&$output)
{
$expecting = 0; // 0=nothing in particular, 1=array open paren '(', 2=array element or close paren ')'
$lines = explode("\n", $output);
$result = null;
$topArray = null;
$arrayStack = array();
$matches = null;
while (!empty($lines) && $result === null)
{
$line = array_shift($lines);
$trim = trim($line);
if ($trim == 'Array')
{
if ($expecting == 0)
{
$topArray = array();
$expecting = 1;
}
else
{
trigger_error("Unknown array.");
}
}
else if ($expecting == 1 && $trim == '(')
{
$expecting = 2;
}
else if ($expecting == 2 && preg_match('/^\[(.+?)\] \=\> (.+)$/', $trim, $matches)) // array element
{
list ($fullMatch, $key, $element) = $matches;
if (trim($element) == 'Array')
{
$topArray[$key] = array();
$newTopArray =& $topArray[$key];
$arrayStack[] =& $topArray;
$topArray =& $newTopArray;
$expecting = 1;
}
else
{
$topArray[$key] = $element;
}
}
else if ($expecting == 2 && $trim == ')') // end current array
{
if (empty($arrayStack))
{
$result = $topArray;
}
else // pop into parent array
{
// safe array pop
$keys = array_keys($arrayStack);
$lastKey = array_pop($keys);
$temp =& $arrayStack[$lastKey];
unset($arrayStack[$lastKey]);
$topArray =& $temp;
}
}
else if (!empty($trim))
{
$result = $line;
}
}
$output = implode(n, $lines);
return $result;
}
/**
* @param string $output : The output of a multiple print_r calls, separated by newlines
* @return mixed[] : parseable elements of $output
*/
function print_r_reverse_multiple($output)
{
$result = array();
while (($reverse = print_r_reverse($output)) !== NULL)
{
$result[] = $reverse;
}
return $result;
}
$output = '
Array
(
[a] => apple
[b] => banana
[c] => Array
(
[0] => x
[1] => y
[2] => z
[3] => Array
(
[nest] => yes
[nest2] => Array
(
[nest] => some more
)
[nest3] => o rly?
)
)
)
some extra stuff
';
var_dump(print_r_reverse($output), $output);
?>
The above example will output:
array(3) {
["a"]=>
string(5) "apple"
["b"]=>
string(6) "banana"
["c"]=>
array(4) {
[0]=>
string(1) "x"
[1]=>
string(1) "y"
[2]=>
string(1) "z"
[3]=>
array(3) {
["nest"]=>
string(3) "yes"
["nest2"]=>
array(1) {
["nest"]=>
string(9) "some more"
}
["nest3"]=>
string(6) "o rly?"
}
}
}
string(20) "
some extra stuff
"
A one line command that serves to nl2br but have it so it displays in html is
function nl2br2($arg){print(nl2br(str_replace(' ',' ',print_r($arg,true))));}
A simple function that will output an array more easily to read than print_r();
<?php
function echo_array($array,$return_me=false){
if(is_array($array) == false){
$return = "The provided variable is not an array.";
}else{
foreach($array as $name=>$value){
if(is_array($value)){
$return .= "";
$return .= "['<b>$name</b>'] {<div style='margin-left:10px;'>\n";
$return .= echo_array($value,true);
$return .= "</div>}";
$return .= "\n\n";
}else{
if(is_string($value)){
$value = "\"$value\"";
}
$return .= "['<b>$name</b>'] = $value\n\n";
}
}
}
if($return_me == true){
return $return;
}else{
echo "<pre>".$return."</pre>";
}
}
?>
made 2 nifty functions based of what some people contributed here. Hope you find them usefull
usage ... call for the dump function. EG: dump($array, "Array dump");
<?php
////////////////////////////////////////////////////////
// Function: dump
// Inspired from: PHP.net Contributions
// Description: Helps with php debugging
function dump(&$var, $info = FALSE)
{
$scope = false;
$prefix = 'unique';
$suffix = 'value';
if($scope) $vals = $scope;
else $vals = $GLOBALS;
$old = $var;
$var = $new = $prefix.rand().$suffix; $vname = FALSE;
foreach($vals as $key => $val) if($val === $new) $vname = $key;
$var = $old;
echo "<pre style='margin: 0px 0px 10px 0px; display: block; background: white; color: black; font-family: Verdana; border: 1px solid #cccccc; padding: 5px; font-size: 10px; line-height: 13px;'>";
if($info != FALSE) echo "<b style='color: red;'>$info:</b><br>";
do_dump($var, '$'.$vname);
echo "</pre>";
}
////////////////////////////////////////////////////////
// Function: do_dump
// Inspired from: PHP.net Contributions
// Description: Better GI than print_r or var_dump
function do_dump(&$var, $var_name = NULL, $indent = NULL, $reference = NULL)
{
$do_dump_indent = "<span style='color:#eeeeee;'>|</span> ";
$reference = $reference.$var_name;
$keyvar = 'the_do_dump_recursion_protection_scheme'; $keyname = 'referenced_object_name';
if (is_array($var) && isset($var[$keyvar]))
{
$real_var = &$var[$keyvar];
$real_name = &$var[$keyname];
$type = ucfirst(gettype($real_var));
echo "$indent$var_name <span style='color:#a2a2a2'>$type</span> = <span style='color:#e87800;'>&$real_name</span><br>";
}
else
{
$var = array($keyvar => $var, $keyname => $reference);
$avar = &$var[$keyvar];
$type = ucfirst(gettype($avar));
if($type == "String") $type_color = "<span style='color:green'>";
elseif($type == "Integer") $type_color = "<span style='color:red'>";
elseif($type == "Double"){ $type_color = "<span style='color:#0099c5'>"; $type = "Float"; }
elseif($type == "Boolean") $type_color = "<span style='color:#92008d'>";
elseif($type == "NULL") $type_color = "<span style='color:black'>";
if(is_array($avar))
{
$count = count($avar);
echo "$indent" . ($var_name ? "$var_name => ":"") . "<span style='color:#a2a2a2'>$type ($count)</span><br>$indent(<br>";
$keys = array_keys($avar);
foreach($keys as $name)
{
$value = &$avar[$name];
do_dump($value, "['$name']", $indent.$do_dump_indent, $reference);
}
echo "$indent)<br>";
}
elseif(is_object($avar))
{
echo "$indent$var_name <span style='color:#a2a2a2'>$type</span><br>$indent(<br>";
foreach($avar as $name=>$value) do_dump($value, "$name", $indent.$do_dump_indent, $reference);
echo "$indent)<br>";
}
elseif(is_int($avar)) echo "$indent$var_name = <span style='color:#a2a2a2'>$type(".strlen($avar).")</span> $type_color$avar</span><br>";
elseif(is_string($avar)) echo "$indent$var_name = <span style='color:#a2a2a2'>$type(".strlen($avar).")</span> $type_color\"$avar\"</span><br>";
elseif(is_float($avar)) echo "$indent$var_name = <span style='color:#a2a2a2'>$type(".strlen($avar).")</span> $type_color$avar</span><br>";
elseif(is_bool($avar)) echo "$indent$var_name = <span style='color:#a2a2a2'>$type(".strlen($avar).")</span> $type_color".($avar == 1 ? "TRUE":"FALSE")."</span><br>";
elseif(is_null($avar)) echo "$indent$var_name = <span style='color:#a2a2a2'>$type(".strlen($avar).")</span> {$type_color}NULL</span><br>";
else echo "$indent$var_name = <span style='color:#a2a2a2'>$type(".strlen($avar).")</span> $avar<br>";
$var = $var[$keyvar];
}
}
?>
Here's a PHP version of print_r which can be tailored to your needs. Shows protected and private properties of objects and detects recursion (for objects only!). Usage:
void u_print_r ( mixed $expression [, array $ignore] )
Use the $ignore parameter to provide an array of property names that shouldn't be followed recursively.
<?php
function u_print_r($subject, $ignore = array(), $depth = 1, $refChain = array())
{
if ($depth > 20) return;
if (is_object($subject)) {
foreach ($refChain as $refVal)
if ($refVal === $subject) {
echo "*RECURSION*\n";
return;
}
array_push($refChain, $subject);
echo get_class($subject) . " Object ( \n";
$subject = (array) $subject;
foreach ($subject as $key => $val)
if (is_array($ignore) && !in_array($key, $ignore, 1)) {
echo str_repeat(" ", $depth * 4) . '[';
if ($key{0} == "\0") {
$keyParts = explode("\0", $key);
echo $keyParts[2] . (($keyParts[1] == '*') ? ':protected' : ':private');
} else
echo $key;
echo '] => ';
u_print_r($val, $ignore, $depth + 1, $refChain);
}
echo str_repeat(" ", ($depth - 1) * 4) . ")\n";
array_pop($refChain);
} elseif (is_array($subject)) {
echo "Array ( \n";
foreach ($subject as $key => $val)
if (is_array($ignore) && !in_array($key, $ignore, 1)) {
echo str_repeat(" ", $depth * 4) . '[' . $key . '] => ';
u_print_r($val, $ignore, $depth + 1, $refChain);
}
echo str_repeat(" ", ($depth - 1) * 4) . ")\n";
} else
echo $subject . "\n";
}
?>
Example:
<?php
class test {
public $var1 = 'a';
protected $var2 = 'b';
private $var3 = 'c';
protected $array = array('x', 'y', 'z');
}
$test = new test();
$test->recursiveRef = $test;
$test->anotherRecursiveRef->recursiveRef = $test;
$test->dont->follow = 'me';
u_print_r($test, array('dont'));
?>
Will produce:
test Object (
[var1] => a
[var2:protected] => b
[var3:private] => c
[array:protected] => Array (
[0] => x
[1] => y
[2] => z
)
[recursiveRef] => *RECURSION*
[anotherRecursiveRef] => stdClass Object (
[recursiveRef] => *RECURSION*
)
)
If you need to import an print_R output back to an array you could use this.
This could also be (ab)used to convert a object into a array...
<?php
function object2array($printr) {
$newarray = array();
$a[0] = &$newarray;
if (preg_match_all('/^\s+\[(\w+).*\] => (.*)\n/m', $printr, $match)) {
foreach ($match[0] as $key => $value) {
(int)$tabs = substr_count(substr($value, 0, strpos($value, "[")), " ");
if ($match[2][$key] == 'Array' || substr($match[2][$key], -6) == 'Object') {
$a[$tabs+1] = &$a[$tabs][$match[1][$key]];
}
else {
$a[$tabs][$match[1][$key]] = $match[2][$key];
}
}
}
return $newarray;
}
?>
This works around the hacky nature of print_r in return mode (using output buffering for the return mode to work is hacky...):
<?php
/**
* An alternative to print_r that unlike the original does not use output buffering with
* the return parameter set to true. Thus, Fatal errors that would be the result of print_r
* in return-mode within ob handlers can be avoided.
*
* Comes with an extra parameter to be able to generate html code. If you need a
* human readable DHTML-based print_r alternative, see http://krumo.sourceforge.net/
*
* Support for printing of objects as well as the $return parameter functionality
* added by Fredrik Wollsén (fredrik dot motin at gmail), to make it work as a drop-in
* replacement for print_r (Except for that this function does not output
* paranthesises around element groups... ;) )
*
* Based on return_array() By Matthew Ruivo (mruivo at gmail)
* (http://se2.php.net/manual/en/function.print-r.php#73436)
*/
function obsafe_print_r($var, $return = false, $html = false, $level = 0) {
$spaces = "";
$space = $html ? " " : " ";
$newline = $html ? "<br />" : "\n";
for ($i = 1; $i <= 6; $i++) {
$spaces .= $space;
}
$tabs = $spaces;
for ($i = 1; $i <= $level; $i++) {
$tabs .= $spaces;
}
if (is_array($var)) {
$title = "Array";
} elseif (is_object($var)) {
$title = get_class($var)." Object";
}
$output = $title . $newline . $newline;
foreach($var as $key => $value) {
if (is_array($value) || is_object($value)) {
$level++;
$value = obsafe_print_r($value, true, $html, $level);
$level--;
}
$output .= $tabs . "[" . $key . "] => " . $value . $newline;
}
if ($return) return $output;
else echo $output;
}
?>
Built on a function earlier posted in these comments as stated in the Doc comment. Cheers! /Fredrik (Motin)
We can all agree that print_r() output is very spartan looking. The debug data needs to be organized better, and presented in a graceful way. In the era of Web 2.0 it is somewhat strange to use plain text to dump information. A DHTML powered informatiion dumping tool will be quite better - like the the open-source alternative of print_r(); -- Krumo (http://krumo.sourceforge.net).
It renders the output using DHTML and collapsible nodes, it's layout is "skinable" and you can change it to fit your aesthetic taste. Krumo makes the output "human-readable" for real :) Plus it is compliant with both PHP4 and PHP5. Plus it detects "reference recursion". Plus you can use it to dump all various sort of data like debug back-traces, the superglobals ($_SERVER, $_ENV, $_REQUEST, $_COOKIE, $_GET, $_POST, $_SESSION), all the included files, all the declared classes, all the declared constants, all your PHP settings, all your php.ini values (if it is readable), all the loaded extensions, all the HTTP request headers, all the declared interfaces (for PHP5), all the file paths from INCLUDE_PATH, all the values of any particular INI file. Additionally it is designed to be easy to use - for example you can disable all the Krumo dumps instead of cleaning your code out of all print_r()'s and var_dump()'s. Anyway, if you check the site (http://krumo.sourceforge.net), you can found a lot of examples, demonstrations, documentation and all sort of helpful information.
We had an interesting problem dumping an object that
contained embedded HTML. The application makes use
of buffer manipulation functions, so print_r's 2nd argument
wasn't helpful. Here is how we solved the problem:
$object = new ObjectContainingHTML();
$savedbuffercontents = ob_get_clean();
print_r($object);
$print_r_output = ob_get_clean();
ob_start();
echo $savedbuffercontents;
echo htmlentities($print_r_output);
None of the function to output to HTML was working for me so I had to write something that suited my needs. It's probably super not efficient but, hey it works well for me on a small scale.
function print_r_html($data,$return_data=false)
{
$data = print_r($data,true);
$data = str_replace( " "," ", $data);
$data = str_replace( "\r\n","<br>\r\n", $data);
$data = str_replace( "\r","<br>\r", $data);
$data = str_replace( "\n","<br>\n", $data);
if (!$return_data)
echo $data;
else
return $data;
}
Simple, isn't? :)
For those of you needing to print an array within a buffer callback function, I've created this quick function. It simply returns the array as a readable string rather than printing it. You can even choose whether to return it in normal text-mode or HTML. It's recursive, so multi-dimensial arrays are supported. I hope someone finds this useful!
<?php
function return_array($array, $html = false, $level = 0) {
$space = $html ? " " : " ";
$newline = $html ? "<br />" : "\n";
for ($i = 1; $i <= 6; $i++) {
$spaces .= $space;
}
$tabs = $spaces;
for ($i = 1; $i <= $level; $i++) {
$tabs .= $spaces;
}
$output = "Array" . $newline . $newline;
foreach($array as $key => $value) {
if (is_array($value)) {
$level++;
$value = return_array($value, $html, $level);
$level--;
}
$output .= $tabs . "[" . $key . "] => " . $value . $newline;
}
return $output;
}
?>
I've got four functions for printing arrays out in a readable fashion, I hope someone finds them useful.
//prints an array in a HTML table. Top row is the keys.
function table( $array ) {
$array = array_values( $array );
$keys = array_keys( $array[0] );
echo '<table border="1"><tr>';
foreach( $keys as $key ) {
echo '<td>'.$key.'</td>';
}
echo '</tr>';
foreach( $array as $row ) {
echo '<tr>';
foreach( $row as $value ) {
echo '<td>'.$value.'</td>';
}
echo '</tr>';
}
echo '</table>';
}
//print_r enclosed in a <pre>, except it will always print something, even if the variable is null, number 0 or false. It also lets you label the dump.
function dump( $var, $label=null ) {
if( $var === '' or $var === null or $var === 0 ) {
var_dump( $var );
return;
}
echo '<pre style="text-align: left; font-size: 10px;">';
if( $label ) {
echo $label."\n";
}
print_r( $var );
echo '</pre>';
}
//This one gives you output you can copy and paste back into your PHP code to recreate the array.
function dump_array( $array, $tabs=1 ) {
$html = "<pre style=\"text-align: left; font-size: 10px;\">array( \n";
foreach( $array as $key => $val ) {
$html .= str_repeat( "\t", $tabs )."'$key' => ";
if( is_array( $val ) ) {
$html .= dump_array( $array, $tabs+1 );
} else {
$html .= "'$val',\n";
}
}
$html .= ')</pre>';
return $html;
}
//just add header( 'content-type: application/vnd.ms-excel' ) and you've got an excel file.
function excel( $array ) {
$array = array_values( $array );
$keys = array_keys( $array[0] );
foreach( $keys as $key ) {
echo $key."\t";
}
echo "\n";
foreach( $array as $row ) {
foreach( $row as $value ) {
echo $value."\t";
}
echo "\n";
}
}
i've been using a similar idea like Sawey's for quite a long time,
but was always disappointed that you don't see the name of the
variable passed to the function (eg calling it many times, you don't
know which value was provided by a certain variable at a certain time).
so i combined sawey's idea with one found on php.net to solve that problem.
for shellscripting the function only uses <pre>-tags when called in the web.
<?php
/* how print_r should be ;) */
function my_r(&$var, $scope=false, $label=false){
if (is_string($scope) && $label==false) $label=$scope;
if (!is_array($scope)) $scope = &$GLOBALS;
$origin = $var;
$var = $checker = "very_weird_value#".rand()."#isnt_it";
$vname = false;
foreach ($scope as $key => $value){
if ($value === $checker){ $vname = "\$".$key; }
if (is_array($value) && $key!="GLOBALS"){
if ($pfad=aver($var,$value)){
$vname = "\$${key}[\"". implode("\"][\"",$pfad)."\"]";
}
}
if (is_object($value)){
if ($pfad=aver($var,get_object_vars($value))){
if (sizeof($pfad)<2) $vname = "\$${key}->".$pfad[0];
else{
$vname ="\$${key}->".$pfad[0];
$vname.="[\"".implode("\"][\"", array_slice($pfad,1))."\"]";
}
}
}
if ($vname) break;
}
$var = $origin;
if ($_SERVER["SERVER_NAME"] && !isset($_SERVER["TERM"])) echo "<pre>";
if ($vname){
echo $vname;
if ($label) echo " #" . $label . "# ";
else echo ": ";
}else{
if ($label) echo "$label: ";
}
print_r($var);
if ($_SERVER["SERVER_NAME"] && !isset($_SERVER["TERM"])) echo "</pre>";
}
/* this function is needed to check in multidimensional arrays
if the value of interest exists. if yes, the path is returned */
function aver($needle,$haystack) { // array value exists recursive
foreach($haystack as $key=>$val) {
if(is_array($val) && $needle != $val && $key != "GLOBALS") {
if($foo=aver($needle,$val)) return array_merge(array($key),$foo);
}elseif($val === $needle) return array($key);
}
return false;
}
?>
Explanation:
The problem with figuring out what value is what key in that variables scope is that several variables might have the same value. To remedy this, the variable is passed by reference and its value is then modified to a random value to make sure there will be a unique match. Then we loop through the scope ( semi recursively ) the variable is contained in and when there is a match of our modified value, we can grab the correct key and output the name.
Bugs:
You can see in the 5th Example, that the so-called non-existant variable infact exists ;|, the problem with referenced variables (as used in the my_r function) is, that they have to exist at call-time to reference them. that is why my_r("test") will result in a fatal error. if you have ideas to solve that, don't hesitate to mention them.
Examples:
1. Use of a variable contained in the global scope (default):
<?php
$my_global_variable = array("nice", "try", "guybrush");
my_r($my_global_variable);
/* Outputs:
$my_global_variable: Array
(
[0] => nice
[1] => try
[2] => guybrush
)
*/
?>
2. Use of a local variable (in a function):
<?php
function my_local_function()
{
$my_local_variable = array("nice", "try", "guybrush");
my_r($my_local_variable,get_defined_vars());
}
my_local_function();
/* Outputs:
$my_local_variable: Array
(
[0] => nice
[1] => try
[2] => guybrush
)
*/
?>
3. Use of an object property:
<?php
class myclass{
public function __constructor(){ // depending on php version ;)
$this->my_object_property = array("nice", "try", name => array("guybrush"));
}
public function myclass(){ // depending on php version ;)
$this->my_object_property = array("nice", "try", name => array("guybrush"));
}
}
$obj = new myclass;
my_r($obj->my_object_property);
/* Outputs:
$obj->my_object_property: Array
(
[0] => nice
[1] => try
[name] => Array
(
[0] => guybrush
)
)
*/
?>
4. Use of a sub-array and an additional label
<?php
$foo=array("nice","try",name => array("guybrush","threapwood"))
my_r($foo["name"],"position 1");
/* Outputs:
$foo["name"] #position 1# Array
(
[0] => guybrush
[1] => threapwood
)
*/
?>
5. Use of non existant Variables (standard-behaviour of print_r)
<?php
my_r($foo=array("nice","try","guybrush"));
/* Outputs:
Array
(
[0] => nice
[1] => try
[2] => guybrush
)
*/
?>
I've seen a lot of tries to give an easy way to output the "print_r" info in a decent way in you favorite browser.
Here's mine:
echo ("<pre>");
print_r("-->here goes your data to output<--");
echo ("<pre>");
I personaly think this is the easyest way.
Grz
some functions I find useful for debugging.
/**
* dump the object in a base.class.php :: print_r2() fashon
this function is for debugging purposes only (obviously)
@see d2()
@param $obj an array of elements, that may have elements that are also arrays.
@param $color the color of the output (useful, when you need to call this several times,
and you need a certain structure to stand out from the others, or simply to differentiate them)
color-coding stuff is a great wa to work, consider this:
@code
p2($struct,'red');
@endcode
to find the function call, just search "red".
in case you find yourself lost, you can always sue the line numbers, @see $dinfo
@param $dinfo see http://www.php.net/debug_backtrace for nifo on debug info.,
0: no info, 1: function call, 2: full backtrace.
@param $title simple remarks you can put to aid you in development. i.e.
@code
$a=array(1,2,3,5,6)
//this
p2($a,'',0,'the numbers');
//is more meaningful than this:
p2($a);
@code
This is particulary true when dealing with many p2()
It is recomended that you *don't* delete p2()'s calls from your code,
but rather document them:
@code
//insightfull comments about spected output
//p2($a123,'',1,'Items in list')
@endcode
or, if you feel more confortable with logging, use this:
$this->log(gp2($struct)); @see gp2()
You can also use p2() as a call trace: helper
@code
function a(){
b();
}
function b(){
c();
}
function d(){
a();
}
function c(){
p2(1,'',2,'backtrace');
}
d();
@endcode
note the use of p2(1), as a simple backtrace enables, you can use
p2($anything,'',2) to display the log, or p2($anything) to show the call route.
the call route follows the following format:
@ file : function : function_call_line_number -> current_line_number
i.e.
@std.php:filter_link():1222->2142
where current line number is the line where the p2() call is, and "function call number"
is the line where the current function was called from (useful as hell).
--
* */
function p2($obj,$color='black',$dinfo=1,$title=''){
//echo();
$dbg=debug_backtrace();
if($dinfo!=0){
//':'.$dbg[1]['class'].
$dinfo="@".basename($dbg[1]['file']).':'.$dbg[1]['function'].'():'.
$dbg[1]['line'].'->'.$dbg[0]['line']."\n";
}
if($dinfo==2){
$dinfo.=print_r(debug_backtrace(),true);
}
if($color==''){$color='rgb(50,50,200)';}
echo("<h3 style='color:$color'>".$title.'</h3><xmp style="color:'.$color.'">'.
$dinfo.print_r($obj,1)."</xmp>");
}
function gp2($obj,$color='black'){
return("<xmp style='color:$color'>".print_r($obj,1)."</xmp>");
}
/**
* @see d2()
* */
function d2_recursive($obj,$label='',$color='rgb(100,100,100)'){
if(is_array($obj)){
$dx="\n<table style='border:1px solid ".$color."' cellspacing=0 cellpadding=2 width=100%>";
if($label!=''){
$dx.="\n<tr><td style='background-color:".$color.";border:1px solid ".$color.
"' colspan=2>".$label."</td></tr>";
}
foreach($obj as $k=>$v){
$dx.="\n<tr><td style='width:1%;color:white;font-weight:bold;font-family:verdana;".
"font-size:10pt;background-color:".$color.";border:1px solid ".$color."'>".$k
.'</td><td style="border:1px solid '.$color.'">';
$dx.=d2_recursive($v,'',$color)."</td></tr>";
}
$dx.="\n</table>";
}else{
$dx=$obj;
}
return($dx);
}
/** \brief nice html object inspector
* @see p2()
* */
function d2($obj,$label='',$color='black'){
echo("\n<!--DUMP:$label START-->\n".d2_recursive($obj,$label,$color)."\n<!--DUMP END-->\n");
}
Sometimes print_r produces large output, especially when the data hierarchy is too deep. It is very difficult to analyze the dump about 1Mb length.
It would be great to have some way to fold arrays and objects and to look deeper into hierarchy only on demand.
Here is the solution. Just pass the print_r output to debug_var function:
debug_var('title', print_r($var, true));
and it will produce nice html with folding option.
<?php
ob_start();
?>
Locals: Array
(
[arr] => Array
(
[0] => Bon Object
(
[n] => id
[v] => 1
[dv] =>
[dn] =>
)
)
[b] => Bon Object
(
[n] => id
[v] => 1
[dv] =>
[dn] =>
)
[k] => 0
[row] => Array
(
[aid] => 1
[bonus] => spell.id: 125;
[req] =>
[brcache] =>
[auto] => 0
)
[sp] =>
)
<?php
$str = ob_get_contents();
ob_end_clean();
debug_var('locals', $str);
function debug_var($name,$data)
{
$captured = preg_split("/\r?\n/",$data);
print "<script>function toggleDiv(num){
var span = document.getElementById('d'+num);
var a = document.getElementById('a'+num);
var cur = span.style.display;
if(cur == 'none'){
a.innerHTML = '-';
span.style.display = 'inline';
}else{
a.innerHTML = '+';
span.style.display = 'none';
}
}</script>";
print "<b>$name</b>\n";
print "<pre>\n";
foreach($captured as $line)
{
print debug_colorize_string($line)."\n";
}
print "</pre>\n";
}
function next_div($matches)
{
static $num = 0;
++$num;
return "$matches[1]<a id=a$num href=\"javascript: toggleDiv($num)\">+</a><span id=d$num style=\"display:none\">(";
}
/**
* colorize a string for pretty display
*
* @access private
* @param $string string info to colorize
* @return string HTML colorized
* @global
*/
function debug_colorize_string($string)
{
$string = preg_replace("/\[(\w*)\]/i", '[<font color="red">$1</font>]', $string);
$string = preg_replace_callback("/(\s+)\($/", 'next_div', $string);
$string = preg_replace("/(\s+)\)$/", '$1)</span>', $string);
/* turn array indexes to red */
/* turn the word Array blue */
$string = str_replace('Array','<font color="blue">Array</font>',$string);
/* turn arrows graygreen */
$string = str_replace('=>','<font color="#556F55">=></font>',$string);
return $string;
}
?>
This example uses ideas from this article:
http://www.zend.com/zend/tut/tutorial-DebugLib.php
Bases on thbley´s sript i use this one to log some actions.
It will return a tabbed like string which you can output or whatever.
Input fields like "Password" will not be shown.
<?php
function print_r_string($arr,$first=true,$tab=0)
{
$output = "";
$tabsign = ($tab) ? str_repeat(' ',$tab) : '';
if ($first) $output .= "<pre><br>\n";
foreach($arr as $key => $val)
{
switch (gettype($val))
{
case "array":
$output .= $tabsign."[".htmlspecialchars($key)."] = array(".count($val).")<br>\n".$tabsign."(<br>\n";
$tab++;
$output .= print_r_string($val,false,$tab);
$tab--;
$output .= $tabsign.")<br>\n";
break;
case "boolean":
$output .= $tabsign."[".htmlspecialchars($key)."] bool = '".($val?"true":"false")."'<br>\n";
break;
case "integer":
$output .= $tabsign."[".htmlspecialchars($key)."] int = '".htmlspecialchars($val)."'<br>\n";
break;
case "double":
$output .= $tabsign."[".htmlspecialchars($key)."] double = '".htmlspecialchars($val)."'<br>\n";
break;
case "string":
$output .= $tabsign."[".htmlspecialchars($key)."] string = '".((stristr($key,'passw')) ? str_repeat('*', strlen($val)) : htmlspecialchars($val))."'<br>\n";
break;
default:
$output .= $tabsign."[".htmlspecialchars($key)."] unknown = '".htmlspecialchars(gettype($val))."'<br>\n";
break;
}
}
if ($first) $output .= "</pre><br>\n";
return $output;
}
echo print_r_string(array($_POST,$_GET)); // for Example
?>
I find a possibly bug, when I wanted to print the structure of a DOMDocument or a DOMDocumentType object.
print_r() outputs the object type correctly, but the properties are missing.
$doc = $imp->createDocument();
$doc->loadXML($xmlString);
print_r($doc->doctype);
the code outputs:
DOMDocumentType Object
(
)
But the subobjects of $doc->doctype exist.
I always use this function in my code, because most of my functions return an Array or Boolean :
<?php
function printr ( $object , $name = '' ) {
print ( '\'' . $name . '\' : ' ) ;
if ( is_array ( $object ) ) {
print ( '<pre>' ) ;
print_r ( $object ) ;
print ( '</pre>' ) ;
} else {
var_dump ( $object ) ;
}
}
?>
( print_r gives no output on FALSE and that can be annoying! )
Here is a print_r that produces xml:
(now you can expand/collapse the nodes in your browser)
<?php
header('Content-Type: text/xml; charset=UTF-8');
echo print_r_xml($some_var);
function print_r_xml($arr,$first=true) {
$output = "";
if ($first) $output .= "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n<data>\n";
foreach($arr as $key => $val) {
if (is_numeric($key)) $key = "arr_".$key; // <0 is not allowed
switch (gettype($val)) {
case "array":
$output .= "<".htmlspecialchars($key)." type='array' size='".count($val)."'>".
print_r_xml($val,false)."</".htmlspecialchars($key).">\n"; break;
case "boolean":
$output .= "<".htmlspecialchars($key)." type='bool'>".($val?"true":"false").
"</".htmlspecialchars($key).">\n"; break;
case "integer":
$output .= "<".htmlspecialchars($key)." type='integer'>".
htmlspecialchars($val)."</".htmlspecialchars($key).">\n"; break;
case "double":
$output .= "<".htmlspecialchars($key)." type='double'>".
htmlspecialchars($val)."</".htmlspecialchars($key).">\n"; break;
case "string":
$output .= "<".htmlspecialchars($key)." type='string' size='".strlen($val)."'>".
htmlspecialchars($val)."</".htmlspecialchars($key).">\n"; break;
default:
$output .= "<".htmlspecialchars($key)." type='unknown'>".gettype($val).
"</".htmlspecialchars($key).">\n"; break;
}
}
if ($first) $output .= "</data>\n";
return $output;
}
?>
Here's a short function that can export php arrays to javascript arrays.
<?php
function php_to_js($array, $base) {
$js = '';
foreach ($array as $key=>$val) {
if (is_array($val)) {
$js .= php_to_js($val, $base.(is_numeric($key) ? '['.$key.']' : "['".addslashes($key)."']"));
} else {
$js .= $base;
$js .= is_numeric($key) ? '['.$key.']' : "['".addslashes($key)."']";
$js .= ' = ';
$js .= is_numeric($val) ? ''.$val.'' : "'".addslashes($val)."'";
$js .= ";\n";
}
}
return $base." = new Array();\n".$js;
}
?>
Example use:
<?php
$my_array = array('gdsag' => 4, 'hello', array(5, 6));
echo '<script>'.php_to_js($my_array).'</script>';
?>
This would output:
<script>
jsvarname = new Array();
jsvarname['gdsag'] = 4;
jsvarname[0] = 'hello';
jsvarname[1] = new Array();
jsvarname[1][0] = 5;
jsvarname[1][1] = 6;
</script>
Now the array is loaded in the browser as javascript. As you can see, it supports multidimensional arrays too.
For very long arrays I have written a little function which formats an array quite nice and uses javascript for browsing it like a tree. The function is very customizable with the $style parameter.
For me it's of great use for browsing large array's, for example when those are used in language-files in some script and so on. It may even be used in "real" scripts for the "real" front-end, cause the tree can very easily be styled (look at the function or the outputted source and you'll see what i mean).
Here's the function:
<?php
function print_r_html($arr, $style = "display: none; margin-left: 10px;")
{ static $i = 0; $i++;
echo "\n<div id=\"array_tree_$i\" class=\"array_tree\">\n";
foreach($arr as $key => $val)
{ switch (gettype($val))
{ case "array":
echo "<a onclick=\"document.getElementById('";
echo array_tree_element_$i."').style.display = ";
echo "document.getElementById('array_tree_element_$i";
echo "').style.display == 'block' ?";
echo "'none' : 'block';\"\n";
echo "name=\"array_tree_link_$i\" href=\"#array_tree_link_$i\">".htmlspecialchars($key)."</a><br />\n";
echo "<div class=\"array_tree_element_\" id=\"array_tree_element_$i\" style=\"$style\">";
echo print_r_html($val);
echo "</div>";
break;
case "integer":
echo "<b>".htmlspecialchars($key)."</b> => <i>".htmlspecialchars($val)."</i><br />";
break;
case "double":
echo "<b>".htmlspecialchars($key)."</b> => <i>".htmlspecialchars($val)."</i><br />";
break;
case "boolean":
echo "<b>".htmlspecialchars($key)."</b> => ";
if ($val)
{ echo "true"; }
else
{ echo "false"; }
echo "<br />\n";
break;
case "string":
echo "<b>".htmlspecialchars($key)."</b> => <code>".htmlspecialchars($val)."</code><br />";
break;
default:
echo "<b>".htmlspecialchars($key)."</b> => ".gettype($val)."<br />";
break; }
echo "\n"; }
echo "</div>\n"; }
?>
The function as it is now does not support the $return parameter as print_r does and will create an endless loop like print_r did in php-versions < 4.0.3 when there is an element which contains a reference to a variable inside of the array to print out :-/
I've tested it with PHP 5.0.6 and PHP 4.2.3 - no problems except those already mentioned.
please e-mail me if you've got a solution for the problems i've mentioned, i myself are not able to solve them 'cause i don't know how the hell i can find out whether a variable is a reference or not.
Print arrays formatted for a browser easily:
<?php
function print_html_r( $aData ) {
echo nl2br( eregi_replace( " ", " ", print_r( $data, TRUE ) ) );
}
?>
You can't use print_r($var, TRUE) inside a function which is a callback from ob_start() or you get the following error:
Fatal error: print_r(): Cannot use output buffering in output buffering display handlers
Diese Seite bei php.net