PHP Doku:: Request an interactive shell - function.ssh2-shell.html

Verlauf / Chronik / History: (1) anzeigen

Sie sind hier:
Doku-StartseitePHP-HandbuchFunktionsreferenzSonstige DiensteSecure Shell2SSH2 Funktionenssh2_shell

Ein Service von Reinhard Neidl - Webprogrammierung.

SSH2 Funktionen

<<ssh2_sftp

ssh2_tunnel>>

ssh2_shell

(PECL ssh2 >= 0.9.0)

ssh2_shellRequest an interactive shell

Beschreibung

resource ssh2_shell ( resource $session [, string $term_type = "vanilla" [, array $env [, int $width = 80 [, int $height = 25 [, int $width_height_type = SSH2_TERM_UNIT_CHARS ]]]]] )

Open a shell at the remote end and allocate a stream for it.

Parameter-Liste

session

An SSH connection link identifier, obtained from a call to ssh2_connect().

term_type

term_type should correspond to one of the entries in the target system's /etc/termcap file.

env

env may be passed as an associative array of name/value pairs to set in the target environment.

width

Width of the virtual terminal.

height

Height of the virtual terminal.

width_height_type

width_height_type should be one of SSH2_TERM_UNIT_CHARS or SSH2_TERM_UNIT_PIXELS.

Rückgabewerte

Beispiele

Beispiel #1 Executing a command

<?php
$connection 
ssh2_connect('shell.example.com'22);
ssh2_auth_password($connection'username''password');

$stream ssh2_shell($connection'vt102'null8024SSH2_TERM_UNIT_CHARS);
?>

Siehe auch


8 BenutzerBeiträge:
- Beiträge aktualisieren...
tsschulz at gmx dot net
11.01.2011 17:07
In my case the ssh2_shell doesn't work every time. There were many problems:
- If I use stream_get_contents, the command(s) never executed
- with while ($buf = fgets...) the loop never stops
- without sleep(1) before stream_set_blocking, the command wasn't execute every time. Anyone knows why?
That's what I made, and it works - but I think it isn't what it should be:
<?php
        $strCommand
= 'tar -C /path/to/extract -xjf /path/from/file.tar.bz2';
       
$sshStream = ssh2_shell($this->sshSession, 'xterm', null, 120, 24, SSH2_TERM_UNIT_CHARS);
       
fwrite($sshStream, $strCommand . PHP_EOL);
       
sleep(1);
       
stream_set_blocking($sshStream, true);
       
$sshUntarRetval = "";
        while (
$buf = fgets($sshStream,4096)) {
       
flush();
           
$sshUntarRetval .= $buf;
            if (
strpos($buf, 'tar -C') !== false)
            {
                break;
            }
        }
       
fclose($sshStream);
?>
stefanov at uk dot ibm dot com
2.05.2008 17:26
Do not use \n to end the command. Some server will fail to process. Use always the standard for PHP end of line: PHP_EOL

'suri at suribala dot com"'s example should be modified as follows (also change the double quotes to single, for better performance):

<?php

$con
=ssh2_connect('192.168.0.1', 22);
ssh2_auth_password($con, 'user', 'password');
$shell=ssh2_shell($con, 'xterm');
fwrite( $shell, 'cd /dir_one;'.PHP_EOL);
fwrite( $shell, 'ls -la;'.PHP_EOL);
fwrite( $shell, 'cd /dir_two;'.PHP_EOL);
fwrite( $shell, 'ls -la;'.PHP_EOL);

?>

Cheers,

Pimmy
josh at hydril dot com
13.07.2007 1:49
To run a shell script with all the variables that you would have when logged in interactively add bash -l or sh --login infront of your command.  The script I use creates a shell script, copies the script to the box with ssh2_scp_send, then executes the script with ssh2_exec.  Hope this helps somebody.

<?php

//Example

$script1 = "bash -l /etc/rc.d/rc.httpd restart";

$connection = ssh2_connect('shell.example.com', 22);
ssh2_auth_password($connection, 'username', 'password');

$stream = ssh2_exec($connection, $script1);
?>
vgopu1 at gmail dot com
9.07.2007 10:17
Hi,

we could also use shell_exec to execute multiple related commands
separated by semicolon (;).

 And I figured out  problem that sometimes arise related to the execution of complex java c/c++ programs. All we need to do is to set the required environment variables. I have a environment variable in .bash_profile. This variable would be set when I log into my account normally through shell. But when we use ssh2_connect(), the environment variables in the .bash_profile are not set, all we need to do is export the required environment variables with shell_exec();

example:

$conn = ssh2_connect($ipaddress);
ssh2_auth_password($conn,$username,$passwd);
$cmd1="/path/to/program1";
$cmd2="/path/to/program2";
$env1="export Variable_name1=path1";
$env2="export Variable_name2=path2"
$stream = ssh2_exec($connection,"$env1; $env2; $cmd1; $cmd2");//this would execute all the //commands and return
// stream
stream_set_blocking($stream, true);
while($o=fgets($stream)){
echo $o.'<br>';
}

...
...

Thanks,
Vikram Gopu .
http:\\my.lsu.edu/vgopu1
johnes at netsite dot com dot br
16.02.2007 18:27
Instead of using sleep(1) try using usleep(350000). If not, you will need to spend much time unnecessary. In my scripts, I tried to use usleep(250000), but it's too short and brought some problems. usleep(300000) worked, but only to garantee use 350000. ;)
galvao at galvao dot eti dot br
18.12.2006 18:03
In response to webmaster at spectreanime dot com:

"For some obscur reasons, just after ur command, u need to make a sleep to be sure, that the command has reached the server and is running"

Actually what you must do is set the blocking of the string to true, so it waits until the server sends data to the STDOUT before echoing it.

So, instead of:

sleep(1);

Just do:

stream_set_blocking($stdio, true);

Best regards,
webmaster at spectreanime dot com
8.06.2005 10:38
// Connection to SSH server
        echo "Connexion SSH ";
        if (!($resource=@ssh2_connect("192.168.0.1"))) {
                echo "[FAILED]<br />";
                exit(1);
        }
        echo "[OK]<br />";
                                                                                                                                                            
        // Authentification by login/passwd
        echo "Authentification ";
        if (!@ssh2_auth_password($resource,"root","your_password")) {
                echo "[FAILED]<br />";
                exit(1);
        }
        echo "[OK]<br />";
                                                                                                                                                            
        // We need a shell
        echo "Shell stdio ";
        if (!($stdio = @ssh2_shell($resource,"xterm"))) {
                echo "[FAILED]<br />";
                exit(1);
        }
        echo "[OK]<br />";
                                                                                                                                                            
        // Execution of any command
        // Be careful to add an '\n' at the  end of the command
        $command = "/bin/ls /tmp\n";
        fwrite($stdio,$command);
                                                                                                                                                            
        // IMPORTANT
        // For some obscur reasons, just after ur command, u need to make a sleep to be sure, that the command has reached the server and is running
        sleep(1);
       
        // Then u can fetch the stream to see what happens on stdio
        while($line = fgets($stdio)) {
                flush();
                echo $line."<br />";
        }
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      
        // It's always cleaner to close all stream
        fclose($stdio);

I truly hope i'll help someone :)
suri at suribala dot com
14.02.2005 14:03
Using ssh_exec, one could execute only one command at a time. However, ssh_shell, offers greater flexibility.

Here is an example:

<?php

$con
=ssh2_connect('192.168.0.1', 22);
ssh2_auth_password($con, "user", "password");
$shell=ssh2_shell($con, 'xterm');
fwrite( $shell, "cd /dir_one\n");
fwrite( $shell, "ls -la\n");
fwrite( $shell, "cd /dir_two\n");
fwrite( $shell, "ls -la\n");

?>

Thanks Sara for your implementation and your help !



PHP Powered Diese Seite bei php.net
The PHP manual text and comments are covered by the Creative Commons Attribution 3.0 License © the PHP Documentation Group - Impressum - mail("TO:Reinhard Neidl",...)