Diese Seite bei php.net
The PHP manual text and comments are covered by the Creative Commons Attribution 3.0 License © the PHP Documentation Group - Impressum - mail("TO:Reinhard Neidl",...)
(PHP 4 >= 4.3.0, PHP 5)
stream_set_timeout — Set timeout period on a stream
Sets the timeout value on stream, expressed in the sum of seconds and microseconds.
When the stream times out, the 'timed_out' key of the array returned by stream_get_meta_data() is set to TRUE, although no error/warning is generated.
The target stream.
The seconds part of the timeout to be set.
The microseconds part of the timeout to be set.
Gibt bei Erfolg TRUE zurück. Im Fehlerfall wird FALSE zurückgegeben.
| Version | Beschreibung |
|---|---|
| 4.3.0 | As of PHP 4.3, this function can (potentially) work on any kind of stream. In PHP 4.3, socket based streams are still the only kind supported in the PHP core, although streams from other extensions may support this function. |
Beispiel #1 stream_set_timeout() example
<?php
$fp = fsockopen("www.example.com", 80);
if (!$fp) {
echo "Unable to open\n";
} else {
fwrite($fp, "GET / HTTP/1.0\r\n\r\n");
stream_set_timeout($fp, 2);
$res = fread($fp, 2000);
$info = stream_get_meta_data($fp);
fclose($fp);
if ($info['timed_out']) {
echo 'Connection timed out!';
} else {
echo $res;
}
}
?>
Hinweis:
This function doesn't work with advanced operations like stream_socket_recvfrom(), use stream_select() with timeout parameter instead.
This function was previously called as set_socket_timeout() and later socket_set_timeout() but this usage is deprecated.
In case anyone is puzzled, stream_set_timeout DOES NOT work for sockets created with socket_create or socket_accept. Use socket_set_option instead.
Instead of:
<?php
stream_set_timeout($socket,$sec,$usec);
?>
Use:
<?php
socket_set_option($socket, SOL_SOCKET, SO_RCVTIMEO, array('sec'=>$sec, 'usec'=>$usec));
socket_set_option($socket, SOL_SOCKET, SO_SNDTIMEO, array('sec'=>$sec, 'usec'=>$usec));
?>
I didn't have much luck with the suggestions below (although I likely applied them wrong).
Instead, I used stream_context_create() and set an http option for timeout. I fed that context into file_get_contents() and voila!
To my desperate friend below: the https transport can also use the http stream context options. I haven't verified this works as I don't have a slow responding ssl to test on. But if you are still stressing, give the below a shot (you may need to modify a bit...)
<?php
$timeout = 5*60;
$options = array(
'http'=>array(
'method'=>"GET",
'header'=>"Accept-language: en\r\n",
'timeout' => $timeout
)
);
$context = stream_context_create($options);
$contents = file_get_contents($source, false, $context);
?>
Yes...that is a 5 minute timeout.
Here is a working example for loops:
<?php
// Timeout in seconds
$timeout = 5;
$fp = fsockopen("www.server.com", 80, $errno, $errstr, $timeout);
if ($fp) {
fwrite($fp, "GET /file.php HTTP/1.0\r\n");
fwrite($fp, "Host: www.server.com\r\n");
fwrite($fp, "Connection: Close\r\n\r\n");
stream_set_blocking($fp, TRUE);
stream_set_timeout($fp,$timeout);
$info = stream_get_meta_data($fp);
while ((!feof($fp)) && (!$info['timed_out'])) {
$data .= fgets($fp, 4096);
$info = stream_get_meta_data($fp);
ob_flush;
flush();
}
if ($info['timed_out']) {
echo "Connection Timed Out!";
} else {
echo $data;
}
}
?>
I have found that in order to actually stop the socket from timing out the script, you must call stream_get_meta_data and check for a timeout within the loop reading from the socket.
Example:
<?php
$sock = fsockopen($host, 80, $errno, $errstr, 30);
if(!$sock){
echo "Unable to get server status";
}else{
$out = "GET /server.php HTTP/1.1\r\n";
$out .= "Host: $host\r\n";
$out .= "Connection: Close\r\n\r\n";
fwrite($sock, $out);
stream_set_blocking($fp, FALSE );
stream_set_timeout($sock, $timeout);
$info = stream_get_meta_data($sock);
while (!feof($sock) && !$info['timed_out']) {
$file .= fgets($sock, 4096);
$info = stream_get_meta_data($sock);
}
fclose($sock);
?>
If you are using fsockopen() to create a connection, first going to write into the stream and then waiting for the reply (e.g. simulating HTTP request with some extra headers), then stream_set_timeout() must be set only after the write - if it is before write, it has no effect on the read timeout :-(
Noticed at least on PHP/4.3.10
stream_set_timeout() is not suitable for such files as UNIX-devices (/dev/...), i suggest to use select() instead with desirable timeout value - that works well.
[WHOOPS! sorry had the key point reversed in my text. ]
I have been trying to understand how to use stream_set_timeout when calling a remote http page and put together the following code snippets. The first one is a simple test file "test.php" that is called as an html webpage.
The key I found is the "stream_set_blocking($fp, TRUE )". If "FALSE", then $status['timed_out'] seems to not have any practical effect. "TRUE" [PHP default] works.
Note, I have two timeouts, stream and monitor. I need both in my application.
<?php
echo $html_stuff\n; //the html header, etc.
ob_flush(); //makes it echo immediately
$delay= 20; //tweak this, seconds
$report = "<div>Test started at: " . date("H:i:s") ."</div>\n";
$report .= "<div>Started delay= $delay)</div>\n";
echo($report);
ob_flush();
$i=1;
$start_time= time();
while($i <= 10){
$diff= time()-$start_time;
$msg = $i . " at " . $diff;
echo "$msg<br>\n";
sleep($delay);
$i= $i+1;
} // end while
$report = "Finished\n";
$report .= " </body>\n</html>";
echo($report);
?>
The second code block calls test.php with the usual "fopen()"
<?php
$fp= fopen("http://URL/.../test.php", 'rb');
$query_timeout= 4; //tweek this
$monitor_time_sec= 120; //master timeout
stream_set_blocking($fp, FALSE ); //THIS IS IMPORTANT
stream_set_timeout($fp, $query_timeout);
$status = socket_get_status($fp);
// fetch data from test.php
while (!feof($fp) && !$status['timed_out']) {
$chunk = fread($fp, 10000);
$length = strlen($chunk);
$html_str .= $chunk;
$diff = time() - $start_time;
$tm = $status['timed_out'];
echo "<div>At $diff seconds >> $length bytes read, Status[timed out]: ($tm)</div>";
ob_flush();
if ($diff > $monitor_time_sec) {
$pq_array['monitor_timed_out'] = true;
break;
} //end if
sleep(2);
$status = socket_get_status($fp);
} //end while, fetching data
fclose($fp);
$pq_array['connection_timed_out'] = ($status['timed_out'])? true : false;
print_r($pq_array);
echo $html_str; //or whatever.
?>
I have found it required to add
"stream_set_blocking($fp, FALSE )"
prior to any fgets(), fread(), etc. to prevent the code from hanging up when remote files are called and the response is slow.
Diese Seite bei php.net